Pavilion Board

Pavilion® » Products » Pavilion Board
Rebates

Peerless®offers many boiler models that qualify for tax credits under the Energy Policy Act of 2005.

Learn More
Parts to Your Door

Peerless® Boilers' official replacement parts distributor. Find parts for all of your HVAC needs.

Learn More

The Pavilion Board baseboard is designed for residential or light commercial applications. The Board combines efficient operation, easy installation and an advanced design for a superior product!

Pavilion Board features:

  • Heavy-gauge, front panel
  • One-piece, seamless end caps
  • Modern, streamlined design with high-luster, white finish
  • Snap-on damper – no hinges which can bind or loosen with age
  • Quiet, trouble-free performance
  • Extra-strength wide brackets; no hanging hooks or wires
  • Many accessory choices to customize installation
Pavilion Board
Model Tube Size Tube/Fin Fins per Ft. Flow Rate Average Hot Water Temperature °F/BTU's
170° 180° 190° 200° 210° 220° 230° 240°
Board 004041 3/4" Copper/Al 60 4 GPM (2000 lbs./Hr.*) 510 580 640 710 770 850 910 970
Board 004041 3/4" Copper/Al 60 1 GPM (500 lbs./Hr.) 480 550 610 670 730 800 860 920
Board 00405 1/2" Copper/Al 60 4 GPM (2000 lbs./Hr.*) 540 600 680 730 790 870 940 1,000
Board 00405 1/2" Copper/Al 60 1 GPM (500 lbs./Hr.) 510 570 640 690 750 820 890 960

1 Ratings are approved under the Latest Edition of the I=B=R Testing and Rating Code for Baseboard Radiation. As allowed by thiscode, 15% has been added for heatingeffect. Ratings are based on active finned length which is 3" less than ordering length. The use of I=B=R approved ratings at 4 G.P.M. is recommended for all normal loop systems, where the water flow rate is equal to 4 G.P.M. When the flow is unknown, the I=B=R approved ratings at 1 G.P.M must beused.

2 I=B=R Ratings are based on active length, which is 4" less than total length, and includes a 15% addition for heating effect.

*Note: The use of I=B=R Ratings at 2000 lb/hr is limited to installations where the water flow rate through the baseboard unitis equal to or greater than 2000 lb/hr. Wherethe flow rate through the baseboard is not known; the rating at 500 lb/hr. must be used.

Bracket: Electro-Galvanized Steel. .048" Nominal Thickness.

End Caps - 3" wide left and right,for use at doorways and wherever a finished end is needed.

Hinged End Caps - 5-1/4" wide left and right. Ideal for semi-recessed installation. Makes removal of front panel easier. Fits flush to the floor. Fully telescopic.

Extension Sets - 7" and 14" wide. Four sections (back, front, top and damper). Telescopes to fill gaps up to 12-1/2" between baseboard panels.

Wall Joiners - 5" and 9". fully telescopic to conceal connecting pipes.

Valve Enclosure - 9" wide left and right. Extra wide 6" hinged door for easy access to valve or vent. Fully telescopic.

Valve Enclosure (Slotted) - 9" wide left and right. Extra wide 6" hinged door for easy access to valve or vent. Fully telescopic.

Inside Corner - 90° and 135°/45°. One piece snap-on for easy installation. Telescopic up to 2-1/2" on each wall.

Outside Corner - 90° and 135°/45° . Use to trim corners at projecting wall. Telescopic up to 1" on each wall.

Splicer Set - 2" wide. Three piece snap-on-top, front and damper joiner. Joins adjacent baseboard panels. Supplied free of charge in 5 ft. to 8 ft. lengths.

Copper Return Bend - Custom designed 180° copper-to-copper return bend installs easily into enclosure, offering supply and return connection from one end of the baseboard. Return bend fits elements.

Tube Support - Provides support for return tube.